ABSTRACTThis pilot study examines the knowledge about tree root systems amongst five treeplanting professionals. The aim is to find out the professionals? collective knowledge ofthe nature of root systems of various trees used in green areas. Furthermore; to explorehow the professionals adapt landscaped green areas to the tree root properties in asustainable manner. Questions: Which tree species have special root properties toconsider and how do the professionals utilize this knowledge? And: How do theprofessionals in general adjust planting according to the root systems of trees in areas tocreate sustainable green environments?Interviews with the professionals were performed.

The demands for higher production yields and better quality materials from the forests are increasing globally. Tree breeding programs are directed to meet the future demands on forests. In order to capture the full benefits from the breeding programs, clonal propagation is necessary. For most conifer species, somatic embryogenesis (SE) is the only available option for large scale clonal propagation of Elite clonal material. For Norway spruce (Picea abies L.

In this investigation has an attempt to find out whether so called transplanting shock depends on the moving and transplanting of trees, to other conditions, or if it is due to the imbalance between the root to shoot ratio. Seventy trees of Prunus avium have been part of the investigation and these trees have been divided into four different groups depending on methods of production, untouched on the field, trees still on the field but with root pruning, trees moved and planted into Root-Control-Bag, trees moved and planted into Spring-rings. To be able to answer the question, measurements of the length of the terminal shoots and the lateral shoots and the dimension of the stem growth have been done and also has a visual judgment of the trees vitality been performed. The result shows that it is not only the move of the trees that gives them transplanting shock, but rather the loss of roots which gives an imbalance between the root and crown..

The first of the dual purposes of this work has been to describe the research that has been done regarding the root causes of terrorism and second, using a general causal theory and examining the political dimensions of it, to discuss whether or not general causal theories (grand-theories) are helpful for researchers and policy-makers when reacting to social developments in the form of terrorism. The essay is a qualitative literature analysis and I have based my studies on mostly new books treating root causes of terrorism. I have concentrated on discussing international terrorism and how political dimensions may impact the occurence of this form of political violence. The conclusions I have made is that there is no widespread consensus among researchers and scholars as to what really causes terrorism. Neither can the general model examined in chapter 5 be used to predict when and where terrorism will occur next.

There is always an endeavor to govern the initial products in the plant cultivation with precision in order to keep down the expenditure and in order to decrease environmental impact. Initial phosphorus fertilizer can then be one possibility in order to keep down the fertilizer cost and to decrease environmental impact. This exam study includes a literature study about location of fertilizer and which effects this give and two field experiments. The aim with initial phosphorus fertilizer to autumn wheat is to accelerate the root growth and to give the crop a big root system before the growth stagnates before the winter. Easy to access phosphorus favours the root growth.

In this thesis, three separate experiments have been performed on different aspects of the interaction between the causal agent of clubroot, Plasmodiophora brassicae, and its hosts. In the first experiment the pathotype of the P. brassicae single spore isolate, which is currently used to construct a reference genome, has been classified using the ECD bioassay. The disease severity of infected plants was scored according to two different scales and the pathotype was determined according to three previously published guidelines. The results were compared to previous published studies describing the e3 isolate. The life cycle of P. brassicae is not well understood.

Root rot causes large economical losses for Swedish forestry. The spread of root rot can partly be prevented by treating the spruce stumps in thinnings. Late pre-commercial thinning (PCT) is one of the forestry measures where stump treatment is not used. Late PCT can be defined as: The act of cleaning the stand with the aim of improving accessibility and sight within the stand, and so to increase the mean stem´s volume during the first conventional thinning. The aim of this study was to examine how late PCT is performed, its spatial extent and if it aids the spreading of root rot. The study was limited to encompass late PCT before first conventional thinnings in spruce stands in southern Sweden. Samples of spruce stumps were taken from four stands where late PTC had been carried out.

Powder Metal (PM) gears are machine element components which operate under the same principle as conventional gears, but, due to their intrinsic material characteristic need to be designed slightly different, and its manufacturing process offers advantages previously unobtainable by conventional steel gear manufacturing methods. The use of PM in similar applications, such as synchronous hubs, makes them a suitable candidate for production in such material. The current master thesis work focuses on gear design using PM by utilizing finite element method (FEM) to reduce weight and inertia taking into account root bending strength and tooth deflection.First a topological optimization is used to determine feasible candidates for different web designs which have as objective to reduce volume, similar topologies were shown during different loading conditions; and hence, this topology was chosen as a suitable candidate. A shape optimization of the topological candidate was performed having as state variables root bending strength, independent for compressive and tensile side of the tooth loading; and tooth deflection, which in concept can be correlated to static transmission error (TE).Another aspect in this thesis analysed is the possibility to incorporate non-trochoid root geometry, a trochoid root is always present when machining with a hob, into the gear root and hence reduce the stress concentration here. Due to the use of PM, a non-symmetric optimized root can be achieved and hence be optimizing compression and tension.Results showed significantly lower inertia, for example certain results showed 40% reduced when compared to solid gear, with adverse effects as increase in tooth deformation and increase in maximum principal stress.

The vegetation?s impact on erosion control is widely explored, even though research? results are scattered where it suggests a both positive and negative relationship between roots and erosion tendency. Research has measured the roots? impact on erosion by many different methods, hence the aim of this study is to offer a clearance of what factors play an important role in the choice of appropriate species controlling river bank erosion. I have therefore studied 17 articles concerning vegetation and erosion control, which were found in different databases such as: Web of Knowledge, Biological Sciences, Academic Search Elite and Google Scholar.

Decomposition of organic matter is a critical process in the ecosystem, which involves many essential biotic and physical parts. Decomposition is therefore an important process both above and below ground. The rate of decomposition is dependent of many environmental factors for example: pH, moisture and supply of oxygen. The decomposition can therefore be affected by large scaled environmental influences, such as acidification and climatic changes. The root litter in the forest is in different ways affected by acidification, liming and manuering.

The work was carried out on Termisk Systemteknisk?s office in Linköping. The aim was to create a computer system with infrared camera technology for quality control and temperature monitoring of manufacturing processes in industry. The system should be configurable such that it can be used on several different issues, including those where the real-time analysis of camera images is required.The developed system is based on an existing framework, Panola, to deal with measurement results and images in a database. The framework is built for the system continually check for new data , and the task was to create a foundation upon which to build systems that use the framework, but fully or partially utilize direct calls .

This paper discuss the possibilities to improve the Swedish political nomination system. It brings up some of the values and norms that can be used to change the existing system. Values as openness, the demand of responsibility and also if there is values from the American spoils system that can be used in the Swedish system. A minor purpose is to discuss the part of the parliament within the nomination process. To investigate this I have some theoretical starting points and a self constructed analysis tool.

The concept of vulnerability is the capacity or the sensitivity to become damaged. Vulnerability are characterized by one or more of the following terms; a system´s sensitivity to exposure to shock, stress or interference, the state of the system in relations to a threshold of damages, and the system´s ability to adapt to the changing circumstances. Vulnerability in this study is referring to the sensitivity of the circumstances that lead to sustainable livelihood that can´t be maintain and that there is an inability to cope with and manage stress. The choice of making a study in this area is based on that action needs to be taken to moderate the vulnerable aspects of society, in this respect in relations to storms. Analyzes of the social vulnerability to climate change or natural events is needed for effective actions.

To be able to evaluate different radio waveforms in a laboratory environment FOI in Linköping has developed an experimental system for radio communication called Rasmus. The system consists of a transmitter, a channel emulator and a receiver. The transmitter modulates a digital signal to a desired analogue waveform. The channel emulator is used to simulate a real radio channel. The channel emulator distorts the signal by splitting it up in several propagation paths.

The aim of this Master thesis is to investigate the similarities and differences between a traditional and a new classification scheme. Two classification systems are compared, "The Swedish Library Classification System" the SAB-system - and Yahoo!. The SAB-system has been used in Swedish libraries since the beginning of the 20^th century, and Yahoo! has been online since 1994. Yahoo! has a Swedish version of its international original, which is used in this study to get a similar starting point with the SAB-system. The method used for this is a content analysis, which in this case is not a quantitative analysis.